Maintenance Guide
Tools Needed:
- Socket wrench set
- Screwdrivers (flat and Phillips)
- Spark plug wrench
- Air compressor
- Oil drain pan
- Grease gun
Regular Maintenance Schedule
- Daily Maintenance: Clean mower deck, check for loose bolts, inspect blades for damage.
- Weekly Maintenance: Check tire pressure, inspect belts for wear, clean air filter.
- Monthly Maintenance: Change engine oil, sharpen blades, lubricate moving parts.
- Seasonal Maintenance: Replace spark plugs, check battery, inspect fuel system.
- Annual Maintenance: Complete tune-up, replace filters, check safety systems.
- Blade Sharpening: Remove blades, sharpen at 30-degree angle, balance before reinstalling.
- Winter Storage: Drain fuel, clean thoroughly, store in dry location.
Specifications
| Model Series | TimeCutter SS 5000 |
| Type | Zero-Turn Riding Mower |
| Color | Red / Black |
| Cutting Width | 50 inches |
| Engine Type | Kohler 7000 Series |
| Engine Power | 24 HP V-Twin |
| Fuel Capacity | 3.5 gallons |
| Transmission | Hydrostatic |
| Cutting Height Range | 1.5 - 4.5 inches |
| Max Speed | 7 mph |
| Turning Radius | Zero inches |
| Weight | 580 lbs |
| Warranty | 3 years commercial / 5 years residential |
Warranty Information
- Full Warranty: 3 years commercial use
- Residential Warranty: 5 years limited warranty
- Engine Warranty: 3 years on Kohler engine
- Additional Coverage: Optional extended warranty available
For warranty service, contact Toro Customer Service at 1-888-384-9939 or visit Toro.com
Key Features
MyRIDE Suspension System
Toro's exclusive suspension system provides superior comfort with adjustable seat and shock-absorbing technology for smooth operation on rough terrain.
Smart Speed Control System
Precise control over ground speed and blade engagement with single-lever operation for maximum efficiency and ease of use.
DuraMax Cutting System
Professional-grade cutting deck with optimized airflow for superior mulching, bagging, and side discharge performance.
Hydrostatic Transmission
Smooth, maintenance-free hydrostatic drive provides infinite speed control and easy operation without gear shifting.
Quick Stick Controls
Dual-lever zero-turn controls provide precise maneuverability with minimal effort for professional-grade cutting patterns.
Commercial-Grade Construction
Heavy-duty steel frame, reinforced deck, and industrial components ensure durability and long service life.
Cutting System Technology
Mulching System
Advanced baffling system cuts clippings multiple times for fine mulch that nourishes lawn
Bagging System
High-capacity collection system with optimized airflow for efficient grass collection
Side Discharge
Powerful discharge system for cutting tall or wet grass without clogging
Deck Wash System
Built-in cleaning port for easy deck maintenance and grass removal
Blade Brake Clutch
Allows engine to run while blades are disengaged for transport and safety
Height Adjustment
Single-point adjustment system for quick cutting height changes
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | Empty fuel tank, dead battery, faulty spark plug | Check fuel level, charge battery, replace spark plug |
| Poor cutting quality | Dull blades, wrong cutting height, clogged deck | Sharpen blades, adjust height, clean deck underside |
| Excessive vibration | Unbalanced blades, loose components, bent spindle | Balance blades, tighten bolts, inspect spindles |
| Loss of power | Clogged air filter, old fuel, dirty carburetor | Clean/replace air filter, drain old fuel, clean carburetor |
| Hydrostatic issues | Low fluid, air in system, worn pump | Check fluid level, bleed system, inspect pump |
| Uneven cutting | Uneven tire pressure, deck not level, worn blades | Adjust tire pressure, level deck, replace blades |
Common Error Indicators
- Oil Pressure Light: Low oil level - Check and refill engine oil
- Battery Light: Charging system issue - Check alternator and connections
- Overheating: Engine temperature high - Clean cooling fins, check coolant
- Hydraulic Warning: Transmission fluid low - Check and refill hydraulic fluid
- Blade Engagement Issue: PTO clutch problem - Check electrical connections
- Starting Problems: Safety switch issue - Check seat and blade switches
Manual Downloads
Current Model Manuals
TimeCutter SS 5000
50" Zero-Turn Mower
TimeCutter SS 4000
42" Zero-Turn Mower
TimeCutter MX 5060
50" MyRIDE Mower
TimeCutter HD 3600
36" Heavy Duty Mower
Popular Previous Models
TimeCutter Z4200
42" Zero-Turn Mower
TimeCutter Z5000
50" Commercial Mower
Super Recycler 21199
Personal Pace Mower
GrandStand 3600
Stand-On Mower