Installation Guide
Tools Needed:
- Socket wrench set
- Screwdrivers (flat and Phillips)
- Torque wrench
- Pliers
- Leveling tool
- Safety gloves and glasses
Step-by-Step Assembly
- Unpack and Inspect: Carefully remove all packaging materials and inspect components for shipping damage.
- Handle Assembly: Attach the handle assembly using provided bolts and torque to manufacturer specifications.
- Deck Installation: Mount the cutting deck ensuring proper alignment with the drive system.
- Engine Preparation: Check oil level, add fuel, and connect battery if applicable.
- Blade Installation: Install cutting blades with proper torque and orientation.
- Control Connections: Connect all control cables and test for proper operation.
- Safety Check: Verify all safety switches and features are functioning correctly.
- Initial Test: Perform a test run in a safe area to ensure proper operation.
Specifications
| Model Series | Titan ZX Series |
| Type | Zero-Turn Commercial Mower |
| Cutting Width | 52", 60", 72" |
| Engine Options | Kawasaki FX, Kohler Command Pro |
| Horsepower | 24.5 - 37 HP |
| Fuel Capacity | 10 - 15 gallons |
| Transmission | Hydro-Gear ZT-3400 |
| Cutting Height Range | 1.5" - 5" |
| Weight | 950 - 1200 lbs |
| Max Speed | 10 mph |
| Turning Radius | Zero inches |
| Warranty | 3-Year Commercial Warranty |
Warranty Information
- Commercial Warranty: 3 years or 1200 hours (whichever comes first)
- Drive System: 5-year limited warranty
- Deck Warranty: Lifetime limited warranty
- Engine Warranty: Manufacturer specific (typically 2-3 years)
For warranty service, contact Toro Commercial Support at 1-888-384-9939 or visit Toro.com/commercial
Key Features
MyRIDE® Suspension System
Exclusive suspension system reduces operator fatigue by up to 50% with independent front and rear suspension that absorbs bumps and vibrations.
ProSlide® Seat
Ergonomic seat with 10-position adjustment and easy-entry design allows operators to quickly mount and dismount while maintaining comfort during long workdays.
Smart Speed Control
Dual-lever control system with infinite speed control provides precise maneuverability and consistent cutting speed regardless of terrain.
Vortex® Cutting System
Advanced deck design creates a powerful vortex that lifts grass for a cleaner cut, better clippings dispersal, and reduced clumping.
Commercial-Grade Construction
Heavy-duty 7-gauge steel construction with reinforced welds and powder-coated finish ensures durability in demanding commercial applications.
Easy Access Maintenance
Flip-up deck, easy-access service points, and tool-free belt changes reduce maintenance time and increase productivity.
Cutting System Technology
Vortex® Technology
Creates powerful airflow for superior grass lift and discharge
Fabricated Deck
7-gauge steel construction with reinforced design for durability
Anti-Scalp Rollers
Prevent deck scalping on uneven terrain for consistent cut quality
Quick-Change Blades
Tool-free blade change system reduces maintenance downtime
Deck Wash Port
Built-in connection for easy deck cleaning after use
Mulching Capability
Convertible deck for mulching, bagging, or side discharge
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | Fuel issue, battery dead, safety switch engaged | Check fuel level, battery charge, ensure all safety switches are properly set |
| Poor cutting quality | Dull blades, incorrect cutting height, deck clogged | Sharpen/replace blades, adjust cutting height, clean deck |
| Uneven cutting | Deck not level, tire pressure uneven, worn blades | Level cutting deck, check tire pressure, replace blades |
| Loss of power | Clogged air filter, fuel filter dirty, spark plug issues | Clean/replace air filter, replace fuel filter, check spark plug |
| Hydrostatic transmission issues | Low fluid, air in system, linkage adjustment needed | Check fluid level, bleed system, adjust control linkages |
| Excessive vibration | Unbalanced blades, loose components, bent spindle | Balance blades, tighten all bolts, inspect spindles |
Maintenance Codes & Indicators
- Oil Change Indicator: Flashing oil can icon - Change engine oil and filter
- Air Filter Alert: Reduced power - Clean or replace air filter
- Fuel Filter Warning: Engine sputtering - Replace fuel filter
- Battery Warning: Slow cranking - Check battery and charging system
- Hydraulic Warning: Transmission overheating - Check fluid level and cooling
- Blade Wear Indicator: Poor cut quality - Sharpen or replace blades
Manual Downloads
Current Commercial Models
Titan ZX 5420
54" Zero-Turn Commercial
Titan ZX 6020
60" Commercial Mower
Titan ZX 7220
72" Wide-Area Mower
GrandStand Z 5000
Stand-On Commercial
Popular Previous Models
Z Master 5000
Commercial Zero-Turn
TimeCutter SS 5000
Commercial Riding Mower
Groundsmaster 4500-D
Commercial Diesel Mower
Reelmaster 5010-H
Hybrid Reel Mower