Installation Guide
Tools Needed:
- Socket wrench set
- Screwdrivers (flat and Phillips)
- Torque wrench
- Pliers
- Leveling tool
Step-by-Step Assembly
- Unpack and Inspect: Carefully remove all packaging materials and inspect components for shipping damage.
- Handle Assembly: Attach the handle assembly to the mower deck using provided bolts and washers.
- Wheel Installation: Install all four wheels, ensuring they are securely fastened with locking nuts.
- Engine Preparation: Check oil level, add fuel, and connect spark plug wire.
- Blade Installation: Install cutting blade with blade adapter and secure with bolt (torque to 40-45 ft-lbs).
- Control Cable Adjustment: Adjust throttle and drive control cables according to specifications.
- Final Inspection: Check all fasteners, test controls, and verify safety features are operational.
Specifications
| Model Series | Toro Commercial 2000 Series |
| Type | Commercial Walk-Behind Mower |
| Cutting Width | 36 inches |
| Engine Type | Kawasaki FX850V Commercial Engine |
| Engine Power | 24.5 HP |
| Fuel Capacity | 5.5 gallons |
| Cutting Height Range | 1.5 - 4.5 inches |
| Transmission | Hydrostatic Drive |
| Weight | 680 lbs |
| Dimensions (LxWxH) | 78 x 42 x 45 inches |
| Deck Material | 11-gauge reinforced steel |
| Blade Tip Speed | 19,000 ft/min |
Warranty Information
- Commercial Warranty: 3 years or 1,000 hours (whichever comes first)
- Engine Warranty: 3 years commercial use
- Deck Warranty: Lifetime limited warranty
For warranty service, contact Toro Commercial Support at 1-800-348-2424 or visit Toro.com/commercial
Key Features
Commercial-Grade Engine
Kawasaki FX850V engine with overhead valves provides reliable power and fuel efficiency for demanding commercial applications.
MyRIDE® Suspension System
Exclusive suspension system reduces operator fatigue by absorbing bumps and vibrations, increasing productivity and comfort.
Deep-Dish Deck Design
11-gauge reinforced steel deck with optimized airflow creates superior vacuum for excellent clippings discharge and clean cutting.
Personal Pace® System
Automatically matches mower speed to your walking pace for effortless operation and consistent cutting results.
Smart Speed™ Control
Allows independent control of forward and reverse speeds for precise maneuvering in tight spaces.
Quick-Stop® Blade Brake
Safety system stops blades within 3 seconds when operator releases handle, meeting ANSI B71.4 standards.
Cutting Systems Explained
Recycler® Cutting
Fine mulching system cuts clippings multiple times and returns them to the lawn as natural fertilizer
Side Discharge
High-velocity discharge for cutting tall or wet grass where mulching isn't optimal
Bagger Ready
Compatible with Toro commercial collection systems for clean, debris-free cutting
Deep Vacuum
Creates powerful vacuum to lift grass for even cutting and superior striping patterns
Groomer® Kit
Optional attachment for vertical cutting that removes thatch and promotes healthy growth
Striping Kit
Creates professional ballpark-style stripes on sports fields and premium lawns
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | Fuel issue, spark plug, safety switch engaged | Check fuel level and quality, inspect spark plug, ensure all safety switches are properly set |
| Poor cutting quality | Dull blades, incorrect cutting height, worn deck components | Sharpen or replace blades, adjust cutting height, inspect deck for wear |
| Excessive vibration | Unbalanced blade, loose components, damaged spindle | Balance or replace blade, tighten all fasteners, inspect spindle assembly |
| Loss of power | Clogged air filter, fuel restriction, engine maintenance needed | Clean or replace air filter, check fuel lines, perform regular maintenance |
| Hydrostatic drive issues | Low fluid, air in system, linkage adjustment needed | Check fluid level, bleed system, adjust control linkages |
| Uneven cutting | Uneven tire pressure, deck not level, worn rollers | Adjust tire pressure, level mower deck, replace worn components |
Error Codes & Indicators
- Oil Light: Low oil pressure - Check oil level and quality immediately
- Charge Light: Charging system issue - Check alternator and battery connections
- Temperature Light: Engine overheating - Clean cooling fins, check oil level
- Blade Engage Light: Blade system fault - Check PTO clutch and wiring
- No Start Condition: Safety interlock engaged - Ensure all controls are in neutral
- Reduced Power: Maintenance required - Service due indicator
Manual Downloads
Current Commercial Models
Toro 20372
36" Commercial Walk-Behind
Toro 20383
36" Commercial with MyRIDE
Toro 20402
36" Commercial Super Recycler
Toro 20453
36" Commercial TimeCutter
Popular Previous Models
Toro 20334
36" Commercial ProLine
Toro 20369
36" Commercial Recycler
Toro 20401
36" Commercial Z Master
Toro 20391
36" Commercial Groundsmaster