Installation Guide
Tools Needed:
- Adjustable wrench set
- Screwdrivers (flat and Phillips)
- Socket set
- Pliers
- Oil funnel
- Gasoline container
Step-by-Step Assembly
- Unpack and Inspect: Remove all packaging materials and check for any shipping damage or missing parts.
- Handle Assembly: Attach the upper and lower handle sections using provided bolts and hardware.
- Wheel Installation: Mount all four wheels onto the axle shafts and secure with retaining clips.
- Height Adjustment: Set the cutting height adjustment lever to your desired position.
- Engine Preparation: Add the recommended engine oil to the proper level before first use.
- Fuel System: Fill the fuel tank with fresh, unleaded gasoline with appropriate octane rating.
- Safety Check: Ensure all safety features are functioning properly before operation.
Specifications
| Engine Model | Briggs & Stratton 450E Series |
| Engine Type | 4-Cycle Gasoline Engine |
| Displacement | 125cc |
| Power Output | 3.5 HP |
| Cutting Width | 20 inches |
| Cutting Height Range | 1-4 inches (6 positions) |
| Fuel Tank Capacity | 1.0 quart (0.95 liters) |
| Oil Capacity | 20 oz (0.6 liters) |
| Starting System | Recoil Start |
| Weight | 55 lbs (25 kg) |
| Wheel Size | 8 inches front, 8 inches rear |
| Warranty Period | 2 years limited warranty |
Warranty Information
- Full Warranty: 2 years limited warranty on entire mower
- Engine Warranty: 2 years on Briggs & Stratton engine
- Commercial Use: 90 days for commercial applications
For warranty service, contact Briggs & Stratton Customer Service at 1-800-233-3723 or visit BriggsandStratton.com
Key Features
Briggs & Stratton Engine
Reliable 125cc 4-cycle engine with overhead valve design for better fuel efficiency, cooler operation, and longer engine life compared to side valve engines.
Dura-Bilt Steel Deck
Heavy-duty 20-inch steel cutting deck with aerodynamic design for superior grass lift and even cutting performance across the entire cutting width.
Single Lever Height Adjustment
Convenient single lever controls all four wheels simultaneously, allowing quick and easy cutting height adjustments from 1 to 4 inches.
3-in-1 Cutting System
Mulch, bag, or side discharge capability. The mulch plug converts clippings into fine particles that nourish your lawn as natural fertilizer.
Easy Start System
Briggs & Stratton's ReadyStart system means no priming required. Just set the choke and pull the cord for quick, reliable starting.
Dual Position Handle
Ergonomic handle with multiple positions provides comfortable operation for users of different heights and reduces operator fatigue.
Cutting System Options
Mulching
Fine cuts grass clippings and returns them to lawn as natural fertilizer
Rear Bagging
Collects clippings in rear bag for clean, debris-free lawn appearance
Side Discharge
Discharges clippings to the side for cutting tall or wet grass
Height Adjustment
6-position single lever adjusts all wheels simultaneously
Deck Wash
Connect garden hose to clean under deck after mowing
Wheel Size
8-inch wheels provide smooth operation over uneven terrain
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | Empty fuel tank, stale gasoline, spark plug issue | Add fresh fuel, check spark plug, ensure choke is properly set |
| Engine starts then dies | Clogged fuel line, dirty air filter, carburetor issue | Clean fuel system, replace air filter, check carburetor |
| Poor cutting performance | Dull blade, improper cutting height, engine speed too low | Sharpen or replace blade, adjust cutting height, check throttle setting |
| Excessive vibration | Unbalanced blade, loose parts, bent blade | Check blade balance and tightness, inspect for damage |
| Uneven cutting | Uneven tire pressure, worn blade, deck not level | Check tire pressure, level deck, replace worn blade |
| Engine overheats | Dirty cooling fins, low oil level, clogged air flow | Clean cooling fins, check oil level, ensure proper ventilation |
Maintenance Schedule
- Before each use: Check oil level, inspect blade, clear debris
- Every 25 hours: Clean/replace air filter, check spark plug
- Every 50 hours: Change engine oil, sharpen blade
- Every 100 hours: Replace spark plug, clean fuel system
- Season end: Drain fuel or add stabilizer, clean thoroughly
- Season start: Change oil, check all components
Manual Downloads
Current Model Manuals
450E Series
125cc 20" Push Mower
550E Series
140cc 21" Self-Propelled
650E Series
163cc 22" Premium Mower
850E Series
190cc 21" Commercial
Popular Previous Models
350E Series
115cc 19" Push Mower
500E Series
150cc 20" Self-Propelled
675EX Series
190cc 21" EXI Model
900E Series
205cc 22" Commercial